Traffic management, security, and safety are top priorities when a company has a project that must be finished close to a road. Companies must ensure the protection and safety of their workers on the roadside project, any nearby pedestrians, and all motorcyclists traveling on the road. We are one of Pakistan’s top manufacturers and suppliers of inexpensive Plastic Road barriers. Dura offers a type of barrier (Traffic Cones) for roadside safety for the protection of the citizenry of Pakistan.
This relates to the fact that they will need their on-site equipment to be adaptable and efficient in halting or limiting the damage caused by accidents, particularly for construction projects on highways or in other high-speed areas. Remember the following as you read about some of the various traffic barriers construction companies might use on a road project.
These are as follows: –
- Wire-rope Barriers
- A-Frame Barriers
- Delineator Tubes
- Concrete Barriers
- Longitudinal Channelizing Devices
- Plastic Pedestrian Barriers
- Traffic Cones
Although any traffic barrier can be utilized on the road, each has a particular function. To keep pedestrians, workers, and drivers safe, you could need more than one sort, depending on the safety standards. Our Company, Duramax. Provides Different Types of Barriers to Roadside Safety. Here is a list of standard road tools used on highways and in low-traffic regions to assist you. Learn more by continuing to read!
May you also like: BEST WATER TANK IN PAKISTAN
1: Wire-rope Barriers
Roads are set up with wire rope or cable obstacles on the sidelines to prevent motor vehicles from getting diverted. These are constructed with two to three horizontal ropes and sturdy vertical poles.
2: A-Frame Barriers
A-Frame Barriers are a type of barricade that is typically used in low-traffic areas. Typically, it is made of a horizontal board with reflectors attached to the edges. Duramax is one of the best W-beam crash barrier suppliers in Pakistan. An A-shaped leg supports each edge to keep it stable.
It is not appropriate for areas with heavy traffic because of its lightweight layout. It is typically used for crowd control, school zones, and short-term construction projects. The horizontal beams with the white and orange lines might draw a pedestrian’s attention and warn them of potentially harmful situations.
3: Delineator Tubes
Delineator tubes have a narrow configuration compared to other barrier types, which have wide footprints. Instead of acting as barricades, these are used to warn approaching pedestrians and cars of the dangers. These are placed on roadways with poor visibility due to their height and neon colors to help and aid drivers.
Additionally, these can be put at the edge of a road to alert vehicles to the remaining distance they have before danger. These can also be set up for temporary lanes if the need to control traffic flow arises.
4: Concrete Barriers
For several years, construction companies have relied almost exclusively on concrete barriers for their work on the sides of roadways. Despite being incredibly durable and sturdy, concrete barriers have several potential drawbacks. The tool used to measure the retroreflection of road traffic signals is called a retroreflectometer. Because concrete walls are not very lightweight, moving and transporting them might be challenging or even impossible in some situations. Additionally, installing concrete barriers takes a lot of time and labor. Additionally, because most concrete walls are grey, they might not provide enough car visibility. Further, they do not limit the impact of other auto accidents, such as the following type of barrier.
May you also like: Significance of Dura Garbage Bins
5: Longitudinal Channelizing Devices (LCDs)
Early in the 20th century, longitudinal channelizing devices were developed to replace concrete obstacles. LCDs are made of high-density polyethylene, as opposed to concrete barriers, and are ballasted with water when discarded along roadside borders. In truth, LCDs help to lessen the effects of auto accidents by absorbing influence and reducing the G-forces experienced by the driver and passengers. Furthermore, LCDs are created in various sizes and designs, typically produced in a bright hue, most notably safety orange. They can also be linked together to make continuous lines.
6: Traditional Plastic/Pedestrian Barriers
Several building sites also require additional barriers to protect pedestrians, in addition to the ones designed to direct traffic and prevent auto accidents. The Jersey Barrier device is one of the most excellent products for use in low-speed traffic zones and prevents people from traveling through a small space. Duramax Company is one of the best Similar to their LCD equivalent; these plastic barriers are easy to move, install, disassemble, and link together to form a continuous wall.
7: Traffic Cones
One of the most common pieces of roadside equipment is traffic cones. These can weigh anything from 1 and 15 pounds while being smaller than other barriers. While some other outdoor projects need 12-inch high cones, more enormous cones are required for highways with more significant speed restrictions. Cones for traffic are very mobile and adaptable.
For more details, please check our Road Safety Barriers.
[…] You can also read about Types of Barriers (Traffic Cones) […]