You are here: Home / Archives for ppr pipes

Facts of Spinning Sliver Cans

//  by 

Dura Max presents the facts of using the Spinning Sliver cans for effectiveness in production or industry efficiency. Please find more detailed points of Spinning Sliver Cans below.

sliver cans

Different sliver can handlings.

The properties of each of these are different from each other. For this purpose, they require different types of sliver handling systems. In addition, it is not done; it causes a lot of imperfections, increases naps, and hairiness in the sliver, which is passed on to the Yarn. It has a range of Spinning Cans for all types of particles.

Impact by the Spinning cans:

Imperfections induced by sliver handling are irrevocable, resulting in lasting yarn quality degradation. The studies conducted by Textile Institutes have confirmed that 3cm of defects in Sliver will be 3 meters of imperfection in yarn. Spinning Cans help spinners gain optimized profits.

Among the facts of Spinning Sliver Cans, apart from their role in reducing imperfections and damages, a sound Sliver Handling system helps enhance yarn quality. Sliver Spinning Cans help the spinning mill improve efficiency by shortening the doffing cycle. Moreover, enabling spinners to gain optimized production, which converts to optimized profits.

Upgradation of the Spinning machine and Sliver Cans

World over Spinning Mills invests heavily in new generation spinning machines from leading companies like Tritschler, LMW, Marzoli, Rieter, and others. In addition, these machines are very high, yielding good results for the spinner. Compatible spinning cans or Partially Damaged Spinning Cans would result in damages, inconsistency, and suboptimal yarn quality, which is not the objective of the investment.

Helps in Sliver Parameters:

The goal of the spinners during the intricate yarn production process is to keep as many of the original sliver properties as possible. Moreover, Processes like sliver collection and discharging, if not handled properly, can cause fiber migration and create imperfections in the sliver they provide stability and consistent performance throughout their working life – continually optimizing the retention of original sliver parameters. For Dura Sliver cans, please visit our Sliver Cans page or Contact us at +9242 37133111.

You also read about Dura Sliver Cans.

Tips for Safety Road Barriers

//  by 

Dura Max presents excellent road barrier products. Safety road barriers are often employed on streets, roads, and highways. They are also known as traffic barriers and are used to manage traffic, divert an out-of-control vehicle, regulate a crowd, or keep pedestrians away from dangerous places. Tips for Safety Road Barriers are explained below. Still, the Duramax safety barrier’s principal goal, whether in the workplace or on the street, is to lower the likelihood of an accident.

road barriers

Tips for Dura Road Barriers:

A few tips for Safety Road Barriers are followings are:

Location

It is preferable to build durable safety barriers whether you are installing them outdoors or within parking barriers. They can survive adverse weather conditions and last for decades before needing to be repaired or replaced. It is preferable to utilize a movable and flexible barrier when placing road barriers near steep corners. These barriers can withstand more significant impact than solid barriers, making it less likely that individuals may sustain severe injuries in an accident.

Easy-to-install

Depending on the sort of venue, simple-to-install safety obstacles have become essential. Consider installing substantial road safety barriers if the area is prone to accidents. Sheetal Group, for example, provides simple road safety equipment to install and maintain. They are dynamically built from robust, impact-resistant material to withstand the most significant load.

Choose visible boundaries

Safety obstacles should be striking and difficult to overlook. When more extensive and rigid blocks are painted appropriately, they stand out. This safety barrier might help them become more visible and aware of their physical environment. You become more careful and develop the habit of scanning your surroundings for potential threats. The correct safety barrier should be a convenient way to ensure safety awareness.

Maintenance

Because they can survive adverse weather conditions and wear and tear, solid safety barriers require little maintenance. However, specific walls are prone to damage following the collision, necessitating the replacement of the entire border. Consequently, following an accident, consider barriers with minimal repair and maintenance costs. For more details about Tips for Safety Road Barriers, Dura Road Safety barriers. Kindly check the Dura Road Safety Barriers Page or contact us.

Dura Max Water Storage Tank

//  by 

Dura Max Water storage tanks are available in several forms. Some Dura water tanks are linked to a home’s plumbing system, while others store water for emergency use. The installation of a tank is defined first and foremost by how the system will be utilized, which includes any pressure pump or irrigation connections required to transport water into and out of the tank. This section will go through the fundamental methods for installing the most popular types of Dura Max Water Storage Tanks.

Dura Max Water tanks

Build a Base or Foundation

Whatever sort of tank you install, you’ll need a flat and level base for it to stand on. Most individuals utilize concrete for the foundation; others choose the less expensive option of spreading a thick layer of compacted building material. The goal is to make an even surface broader than the tank. You should also ensure that the base is not too rugged or rough since this might puncture or unbalance the tank.  

Add Overflow Drainage (for rain harvesting)

You’ll need an overflow spout if you’re installing a water harvester. Some tanks include an overflow assembly; others may require you or a specialist to install one. Fortunately, it’s not a difficult task. Simply drill a hole, connect a gasket and, if necessary, a filter, and screw the fixture into place. This ensures that any extra water a) has somewhere to go and b) does not damage the concrete foundation owing to overflow water dripping on it.

Attach to a Water Supply

If the tank’s water source is a well, you’ll need a pressure tank to guide the water from the well to the Dura Max Water Storage Tank. Getting this network of pipes and fittings level and correctly pressured is a difficult task that a qualified plumber or contractor should perform. If you are unsure about your talents, you should employ a professional.

If the water tank is meant to collect rainwater, a rain catcher or drainage system will be required to send the rainfall to the tank. This is usually simply a roof gutter system with a downspout and some fill piping that flows to the tank’s entrance. This is known as a “dry” delivery mechanism.

Set up the Pressure System (for Well Water Systems)

Any type of pressurized plumbing system will need additional gear. In most circumstances, a check valve, a pressure tank, a relief valve, a pressure switch, and a boiler drain are required. 

For Orders or details or check the BEST WATER TANK IN PAKISTAN, kindly contact our UAN: 042 371 33 111 or contact us through our Social Media Pages.

Dura Max PPRC Pipe

//  by 

PPRC pipe, also known as Polypropylene Random Copolymer pipe, is a cylindrical and rigid PPRC pipe. The pipe is manufactured in a continuous process called extrusion. Dura Max PPRC pipe is often green in color. Most PPRC pipes range in diameter from 20mm to 110mm. This indicates that Dura Max PPRC pipes are thicker than PVC pipes. PPRC pipes also include a network of fittings, accessories, and components. These attachments are available in various sizes to fit each PPRC pipe diameter.

Dura Max PPRC Pipes

Most Common Applications for Dura Max PPRC Pipe?

As previously stated, PPRC pipes have various economic, environmental, and durability advantages. This is why these pipes are employed in so many different applications. Continue reading to learn about the principal applications of PPRC pipe fittings:

Dura Max PPRC pipe & fittings are commonly utilized in the design of cold and hot water systems. PPRC pipes are the finest choice for cold and hot water systems due to their ability to handle hot and cold temperatures without breaking or cracking. Furthermore, its low thermal conductivity ensures that the fluids maintain the necessary temperature.

PPRC fittings are the preferred method of releasing chemical fluids, including industrial waste. Because of its capacity to handle solid chemicals and alkaline solutions, PPRC piping is the ideal pipe fitting for industries.

Purified water delivery systems also employ PPRC pipe fittings. These pipes are long-lasting, with a lifespan of more than 50 years. Furthermore, even under extreme conditions, they do not easily shatter or crack.

PPRC pipes are ideal for use in a building’s heating system. These pipes can be put in flooring, radiant heating, and wall heating systems. These pipes can endure all surfaces and situations, making them an excellent choice for your heating requirements.

For Orders or details or check the PPRC fittings Page, kindly contact our UAN: 042 371 33 111 or contact us through our Social Media Pages.

Reasons to choose PPRC Pipes.

//  by 

Random polypropylene copolymer pipes, often known as PPRC or PP-R (random polypropylene) pipes, have several applications.

It is a material with a high capability for meeting the design requirements of each scenario. Different diameters, thicknesses, and strengths, as well as the insertion of auxiliary components, complementary parts, or the adaptability of ends to any bonding system, are qualities that make PPRC a product that should always be included in the design and construction of pipes.

The use of Dura Max PPRC Pipes has helped to finally overcome the previous concerns with mechanical behavior, wateriness, and durability.

pprc

Poor assembly, however, may derail any attempt, even if it is done with the best materials available. Here are a few examples:

Anti Microbial Protection:

Moreover, Polypropylene copolymer pipes used for drinking water distribution shall not contaminate or deteriorate the quality of water delivered with germs or chemicals that might endanger consumer health. The increased concern about water quality in distribution systems has resulted in a system enhancement by integrating a unique antimicrobial additive that successfully inhibits the growth of bacteria and fungus inside pipe walls.

Anti-dilation Pipeline systems

The Systems are made of plastic materials and have a high degree of expansion owing to variations in fluid temperature. Also, adding microfibers decreases the dilation coefficient by 75%, resulting in a dilation coefficient of 0.04 mm/moC. The meshing of microfibers and the addition of a compatibility additive increase the mechanical strength of the system.

Anti-incrustation protection:

The roughness of the pipes and the fluid quality are factors that favor the inlays. Increased scales result in a smaller section, more load loss, and higher energy consumption. Moreover, Dura Max PPRC pipes are entirely smooth, with no section decreases over time, ensuring the invariability of their roughness coefficient.

Physical Deterioration Resistance

Abrasion is a natural occurrence in all types of pipes. To eliminate deposits, any sanitation system necessitates cleaning operations using high-pressure water. Dura Max PPRC pipes are less prone to abrasion and are not harmed by cleaning operations.

Safety

A sanitary system must be watertight. Dura PPRC pipes are built with elastic joints that assure sealing.

Economical:

Dura PPRC pipe is unrelated to the petrochemical sector; its cost is cheaper and constant.

Ecological

Since its inception, the copolymer tube has been a product that preserves the environment. It is biodegradable and does not release harmful waste during manufacturing or operation. Installation in the open without protection. Contact Dura Max PPRC Pipe and Fittings for more details.

Why is Dura PPRC pipe needed in your home?

Lamp Poles

//  by 

The Importance of Dura Light/Lamp Poles and How to Keep them from residential streets and housing projects to parking lots, restaurants, retail malls, and industrial facilities, light/lamp poles play a crucial part in the safety and security of everything. Because of the impacts of wind, vibration, and corrosion in a typical outdoor setting, periodic inspections and maintenance are required to guarantee that a light pole is safe and structurally sound.

lamp poles

Maintenance of Light/Lamp Poles:

Winds, vibration, metal fatigue, and corrosion may erode a light pole’s structural integrity over time, increasing the likelihood of it could tumble during bad weather or an accidental hit. Routine inspections and maintenance are crucial to avoiding injuries, property damage, and operational failures. Typically, this includes:

  • Inspecting the light pole base:

The base of a light pole is the most crucial portion. Welds between the base plate and the bar might fail due to wind and vibration. Welds should be checked for cracks, flaking, and other damage and fixed as needed.

  • Examining the pole for corrosion damage:

 The entire pole should be inspected for rust and corrosion, weakening the metal and making it prone to fractures or breaks. If corruption is discovered, it may be measured using a hammer and punch, with any denting, flaking, or deformation indicating substantial damage. If accessible, ultrasonic equipment can be utilized for a more complete check.

  • Fastener inspection:

Bolts, nuts, and screws can become loose over time. To avoid tampering, each fastener should be checked for tightness, and nut covers, if fitted, should be changed. Any issues should be resolved.

  • Inspecting Hand Hole and Base Covers:

Handhole and base covers should be examined and replaced if missing or damaged.

  • Electrical system:

The light pole should be examined for stray currents, poor grounds, shorts, and other electrical faults to minimize shock dangers and accidents.

  • Replacing bulbs:

Check bulbs and ballasts for good operation and replace any burned-out or damaged ones.

  • Control system testing:

Moreover, Photosensors, timers, and other controllers should be examined for correct operation and, if required, fixed or replaced.

Contact Dura Max Poly Lights Division for more details.

Home

What is PPRC?

//  by 

Because they are constructed of contemporary polymers, PPRC pipes are flexible and indestructible. This material also makes them lightweight, portable, and simple to use. PPRC pipes are commonly used for the following applications:

  • Within the structure, there are hot and cold plumbing systems.
  • Solar energy systems
  • Solar energy collectors
  • Air-conditioning systems
  • Air conditioning units
  • Piping systems in the industry

PPR raw materials are classified into three types based on their heat resistance, pressure resistance, and chemical resistance. These are Type-1 (polypropylene homopolymer), Type-2 (polypropylene block copolymer), and Type-3 (polypropylene block copolymer) (Polypropylene Random copolymer). Type-3 materials are more resistant to physical and chemical impacts than Type-1 and Type-2 materials. When you notice PPRC, it signifies that your pipes are made of Type-3 materials.

Used for PPRC:

In Dura, Type-3 raw materials are generally used for the pipe and fittings sector. They are to be used for their strong resistance to heat and chemicals. The raw material of PPRC is a fundamental key for PPR Pipes and fittings’ hot and cold-water systems. Moreover, the PPR raw material monomer plastic forms random chains and protects the pipe’s body. This prevents the growth of any biological substance (bacteria, for example) on PPR pipes and fittings. It also protects against smell and retains the flavor of the fluid as it is; in other words, it does not affect the taste. It may also be produced in any color. At ideal pressure and temperature conditions, the lifetime of PPRC pipes and fittings can reach 50 years.

Main Feature of Dura PPRC System:

  • With a temperature of around 20 °C and a pressure of 25 ATM, the battery has a lifespan of over 50 years.
  • It can withstand temperatures ranging from 20 ° C to +95 ° C. (The temperature of the fluid in the insulating must be taken into account.)
  • Because of the substance, it is long-lasting.
  • Extremely resistant to chemicals and heat.
  • The inner surface is brilliant and smooth.
  • When PPRC is utilized for plumbing, the water’s color, odor, and taste do not alter.
  • Insulates against heat and sound.
  • Fittings have no diameter twist. This results in one of the best potential performances.
  • Save up to 70% on installation and installation
  • Friendly to the environment
Home

Cleaning a Water Tank?

//  by 

Cleaning a water tank is similar to cleaning a large bathtub, but more attention is paid to cleaning the interior.

Here’s a brief overview of the steps:

  1. Drain the water tank – If you have a large Cleaning Water Tank, flush the water to a location that will not inundate the surroundings. The dryer the tank, the better the outcome, so use a pump or wet vac to remove any water left over during the draining operation. Finally, use a towel to remove any remaining moisture.
  2. Scrub the interior – This is most likely the most crucial step in the cleaning procedure. You want to get clean of any dust, sand, or slime that has developed on the tank’s walls. Because some tanks don’t have enough room for you to reach in and clean the interior manually, power cleaners are an excellent tool for the job. If you don’t have a steam cleaner, use hard-bristled brushes, an adjustable-handled mop, or any other equipment that can be used at an angle. The goal is to reach every tank area and apply enough force to remove all slime and sand accumulated since the last cleaning. When you’re done, the tank should look like it did the day it arrived: spotless.
  3. Rinse the tank – Using cold water, wash out the unclean water collected during the cleaning operation. Because you’ll be washing again later in the cleaning process, you don’t need to go as thorough this time.
  4. Bleach the interior – Use your bleach solution (1 tablespoon of bleach for every gallon of water) to scrub the interior of the tank. During this step, you should wear disposable gloves and eye protection. Again, you can do this with your hands, but you must ensure you can reach every tank surface. The best tool for the job is a pressure washer, but you may also use a floor mop with an adjustable handle—whatever works for you.
  5. Let the solution sit – To disinfect the tank sufficiently, you’ll want to let the bleach solution sit for at least two hours. This will eliminate any unresolved bacteria or microbial pollutants.
  6. Optional: Clean the water supply lines – Your home’s water pipes may also be dirty. You can clean more than your Cleaning Water Tank by running your taps with the bleach solution. You can use a pump to move the key from the tank to the water supply and the rest of your home’s lines.
  7. Rinse out the tank – After the bleach has done its job, it’s time to rinse it. Because bleach is dangerous and should not be used in drinking water, you should be as thorough as possible. As a result, be sure that no bleach is left behind. If you run part of the solution through your water pipes, run hot water through your taps. Continue cleaning or running the water until all soap or bleach bubbles have vanished.
  8. Optional: Refill the tank partially – Now that the tank has been cleaned, sanitized, and washed of the bleach solution, fill it with potable drinking water.
  9. Optional: Measure chlorine levels – To ensure there’s no more bleach in the system, use chlorine test strips to test the water supply lines. You can proceed to the final stage if the levels are minor. If the chlorine levels are too high, go back to step 7 and rinse the inside until the levels are lower.
  10. Refill the tank- Now that the tank has been cleaned, sanitized, and washed free of the bleach solution, you can fill it up to the brim with drinkable drinking water.

For further assistance, Contact our Representative for guidance.

Why PPRC Pipes:

Gate Valve

//  by 

Dura Max offers excellent PPRC Fittings products such as Gate Valve. Gate valves are used in the opening and shutting of pipes. Which are gradual; they cannot produce a water hammer. As a result, some organizations demand that the valve closest to the water meter be a gate valve. Gate valves are highly durable and perform admirably in settings where corrosion is a significant concern. Because this material can withstand high temperatures, it is often employed in manufacturing applications.

pprc

Gate valves are often used to control the flow of liquids in larger sections of pipes. They are specifically intended to prevent the start and stop of liquid flows. There are several types of gate valves. They can have rising or non-rising stems, solid wedges, flexible wedges, or split wedges. Here are the three most significant advantages of installing gate valves.

1. Full Open/Close Capabilities: Gate valves can be opened and closed completely. This permits goods to be conveyed to flow in a straight line with nothing impeding their progress. This is especially useful when working with bulkier materials that require unhindered flow.

2. Ease of Operate: The gate valve is effortless because it does not contain complicated mechanisms. The spindle wheel revolves to raise and lower the gate, allowing the valve to open and close the gate between its circular openings.

3. Damage Control: Gate valves are handy for halting the flow of liquids when partial discharge would otherwise cause irreversible damage to pipelines and systems. When the valve fully opens, the gate is not exposed to the flow of materials, preventing harm from strong material currents. This prevents the gate from bending or closing off-center due to the tremendous stresses of everyday material flow transit.

Why PPRC Pipes:

//  by 

Pipes are essential components of any plumbing system, and the quality of the pipe determines how dependable the plumbing system will be. Historians have discovered evidence of pipe-based plumbing systems in the Sumerian culture, believe it or not. Plumbing was done with clay pipes back then.

Technology has come a long way since then. Most pipes are now composed of synthetic materials, which are more dependable and endure longer. PPRC pipe Islamabad is highly famous in Pakistan. Let’s look at why these pipes are so popular and why installing them in your plumbing system is an intelligent choice.

Why Use DURA PPRC Pipes for Plumbing?

  • Corrosion Resistant:

Iron pipes were quite popular just a few years ago. The common misconception about these iron pipes was that iron is a potent substance and an excellent choice for plumbing. However, no one was considering the corrosion issue at the time.

The truth is that iron pipes frequently leak owing to corrosion. PPRC pipes, on the other hand, are entirely corrosion-resistant and never leak, even after years of usage. As a result, you may have confidence in the durability of PPRC Pipes.

  • UV Ray Protection:

To reduce corrosion, many individuals are installing PVC pipes. Although PVC pipes do not corrode, the sun’s UV rays can cause harm to them. As a result, PVC pipes should not be used in sunny places. Unfortunately, Pakistan receives a great deal of sunshine.

As a result, if you utilize PVC pipes in your structure, they will break within a few years. PPRC pipes, on the other hand, are impervious to UV radiation. As a result, even after years of usage, PPRC Pipes never need to be replaced. PPRC pipes have a substantially longer lifespan than PVC pipes.

  • Industrial Application:

In the industrial sector, PPRC pipes are quite popular. Any leak in the plumbing system can result in massive losses for any company. As a result, most industrial sectors choose a dependable plumbing system that does not require any maintenance.

PPRC Pipes are now the most dependable for industrial applications. These pipes are versatile and may be utilized in various industrial applications. As a result, employing these pipes in any building project saves money. As a result, PPRC pipes have become the preferred choice for most contractors.

You would be pleased to learn that DURA PPRC Pipes are manufactured in Pakistan. Pipe made of polypropylene. DURA is one of the major PPRC pipe makers. They sell PPRC pipes in large quantities. If you are working on a major construction project and want a significant amount of PPRC pipes, ordering straight from this manufacturer will save you a lot of money.

Contact Now DURA MAX PPRC Pipe and Fittings.